The Deep Well LRW PTLevel
(Long Range Wireless)
For applications as deep as 70′. A weather-resistant liquid level monitor with up to 1km range. The receiver is plugged-in inside your house where there is a WiFi signal. The transmitter is installed up to 1km away at the tank and is battery powered.
Log into the free app on iOS or Android, or ptdevices.com, to view your level history, set up SMS and email alerts, change your tank settings, share with your water delivery company, and more.
CA$580.00
Simple WiFi Connectivity
Connect the PTLevel to your home WiFi signal in a few minutes.
Long Wireless Range
Transmitter to receiver can achieve up to 1km signal range!
Long Battery Life
Enjoy 2+ years of battery life on 4xAA batteries
Easy Fast Installation
Power the Device
Install the included 4AA batteries into the transmitter. Then plug in the receiver somewhere in your house or wherever it can be indoors and has an accessible WiFi signal.
Connect the WiFi
Using the simple step by step WiFi connection setup, get the PTLevel connected to the internet via your WiFi connection.
A step by step guide is provided with the included full color manual. Use the iOS or Android App for a seamless step-by-step connection.
Install PTLevel
Install the PTLevel transmitter on the tank, lower the pressure transducer in the liquid, and press the button.
It is ok to install the transmitter outside but you must make sure it doesn’t get submersed.
Use in your drilled well chemical tank, and in your most challenging liquid level environments…
Deep Well Transducer Features
Deep Well Monitoring Questions
If you have liquids 0-70′, the PTLevel Deep Well Water Monitor still might work for you! Just know, any liquids below 70′ are not being monitored.
Case Study: So if you have liquid at 50′ and below, you would input your “tank depth” settings at 20′ (70′ minus 50′), when the liquid level is at 50′ you would calibrate it to 100%. When your device reads 100%, you would have water at 50′ deep (or 20′ of liquid), when your level reads 50% you would have liquid at 60′ deep, and when your level reads 0% your liquid is at 70′ or below.
Our Deep Well Transducer PTLevels currently come in 70′ and 30′. They are designed to measure small and large tanks.
The wire can not be shortened, but excess wire is not a problem (just tuck the extra wire inside the tank).
Absolutely. The Deep Well Transducer components that touch liquid are made out of the following:
Stainless Steel Sensor (rated CE Certified, IP68 Certified, Intrinsic Safety Certification (explosion proof). It is chemical resistant and corrosive compatible to 1Cr18Ni9Ti and 316L
The wire is coated in durable and chemical resistant polyurethane.
Not a problem!
Often drilled wells have water sources that have salt, sulfides, chlorides, gases, particulates, and higher temperatures than normal. All of these “problems” are not problems with the stainless steel pressure sensor. The Deep Well Transducer PTLevel can measure any consistent density liquid.
Purchase Online
Order securely online here. Orders are typically shipped within 1 day.
Free Shipping in Canada and the USA (not including the Virgin Islands)
Made in Canada
Designed in Canada
Made in Canada with many Canadian and USA supplied parts
Customer Support in Canada
