Introducing the Wired WiFi PTLevel

A plugged in WiFi connected level monitor

CA$259.99

Purchase Now

Simple WiFi Connectivity

Connect the PTLevel to your home WiFi signal in a few minutes.

Weather Proof Design

Install it outside with peace of mind.

Plugged In

Powered by a low voltage extendable IP44 power supply.

Easy Fast Installation

1

Plug in the Device

Use the supplied power supply (240cm/7.9ft long water proof wire included), run a low voltage wire, or use a basic POE power injector to power the PTLevel without the worry of managing batteries.

The provided wire can be extended easily if needed. The main thing is that you have a good WiFi signal at the location of the PTLevel installation.

2

Connect the WiFi

Using the simple step by step WiFi connection setup, get the PTLevel connected to the internet via your WiFi connection.

A step by step guide is provided with the included full color manual. There is also a WiFi Connect app for Android and iOS that assist with the WiFi connection process.

3

Install PTLevel

Install the PTLevel on the tank, drop the pressure chamber in the liquid, and finally connect the power cable.

You can screw down the PTLevel optionally and you’ll simply need to drill a small hole (6mm/1/4in) for the tubing run into the tank. It is ok to install the PTLevel outside but you must make sure it doesn’t get submersed.

Use in your cistern, dug well, peroxide tank, fertilizer tank, chlorine tank, sump. Just to name a few…

A few online features

  • On any device
  • Know – SMS and Email alerts
  • Free – all needed functions are free
  • History – usage over time
  • Share with your delivery company
  • Save Money
More Information About PTDevices Online

What You Get

Purchase Now

Purchase Online

Order securely online here. If you order online before 12pm EST, your order will be shipped the same day.

Free Shipping in North America

Purchase Now

How does the PTLevel Wired WiFi work?

  • The PTLevel is mounted on the top of your tank where it is connected to the provided 13′ of 5/32″ tubing. You can order more tubing if needed.
  • The other end of that small tubing is then connected to the weighted “Pressure Chamber”.
  • When the Pressure Chamber is dropped into your tank, the liquid pushes up into the chamber and creates an air pocket.
  • That air pocket is then read by the PTLevel every minute.
  • The data is sent to our online services using your WiFi internet connection, where it is processed into a level reading, alerts, and more.

Features and Specifications

  • Communication online using a WiFi connection to the internet.
  • Powered by a provided IP44 low voltage power supply.
  • 13′ of tubing is supplied, but you can request more if needed.
  • Weather proof design. It can be installed outside with no issue.
  • -40°C to 100°C temperature range.
  • Water depth maximum with supplied Pressure Chamber and sensor – 18′. If deeper depths required, please contact us.
  • PTLevel device dimensions – 69mm x 140mm x 51mm.
  • Pressure chamber dimensions – 250mm total height, 91mm base diameter, 26mm base height, 22mm tube OD.

Warranty and Guarantee

2

Year Workmanship Warranty

We stand behind our products. If the product does not perform the way it is advertised, we will work with you in every way possible to get it working properly.

30

Day Guarantee

Within 30 days of the purchase, if the device does not work for your scenario, we will refund the device purchase upon receiving the device back.

See our online Knowledgebase Articles for more information.

Knowledge Base
Download Device Manual
Purchase Now